Product name

Nylon printing paste

State

Paste

Packing

25KG/drum for white,20KG/drum for clear

Storage

6 months in cool place

Application

Suitable for waterproof fabric, mercerized cotton, nylon, TPU, PU etc.

Features

1. High elasticity

2. Extra fastness

3. SGS detecting passed, no PVC, no heavy metal, no NPEOs

Mix proportion

Light: White printing paste 70-80% + Clear printing paste 20-30% + pigment ?%

Deep: White printing paste 20-30% + Clear printing paste 70-80% + pigment ?%

Printing process

1. Printing with clear printing paste for 1-2 times

2. Mixing with white printing paste, clear printing paste, pigment and stirring them evenly.

3. Printing again for 3-4 times (3-4 scrapes per time).

4. Drying it in room temperature, or baking for 1-3 minutes under 150-180℃

5. Finish.

Attentions

1. Please drying paste surface with cold air each time before re-printing.

2. The pigment is max 12%, otherwise it’ll be easily faded.

品名

高级尼龙胶浆              

外观

糊状

包装

白胶浆25KG/桶，透明浆20KG/桶

贮存期

常温下6个月

应用

防水涂层布、丝光棉、硅油布、尼龙布、也可用于TPU、PU等皮革等

卖点

1. 超强牢度耐水洗

2. 手感柔软

3. 符合美国ASTM对邻苯二甲酸脂和欧盟EN71 Part 3对重金属含量的要求

调配比例

印浅色：白胶浆70-80% + 透明浆20-30% + 固化剂3% + 色种？%

印深色：白胶浆20-30% + 透明浆70-80% + 固化剂3% + 色种？%

工艺流程

1. 丝网选用100-120目，用丝印硬方刀75度刮印, 以透明浆打底1-2次

2. 将白胶浆，透明浆，色种，固化剂搅拌匀印2-3次

3. 24-48小时自然干燥，或150-180度焙烘1-3分钟

注意事项

1. 加入固化剂的尼龙浆必须在4~8小时内用完